Welcome To b2b168.com, Join Free | Sign In
中文(简体) |
中文(繁體) |
Francés |Español |Deutsch |Pусский |
| No.13604576
| No.13604576
- Product Categories
- Friendly Links
| Information Name: | High-temperature sterilization pot prices |
| Published: | 2014-11-29 |
| Validity: | 300 |
| Specifications: | 700X1200MM |
| Quantity: | 1.00 |
| Price Description: | |
| Detailed Product Description: | When plants are used for packaging food products in general a good product for the atmospheric boiling heat sterilization of the forms of horizontal retorts, counter-pressure sterilization equipment to achieve this through the introduction of compressed air. Cooling demand in the pot were required to pump into the pot with the top of the water pipe (or the use of water system). During sterilization, since the heating temperature is raised, the packaging bag pressure will exceed the outer bag (the pot) pressure. Therefore, in order to avoid the pressurization sterilization packaging damage, back pressure must be exerted, that is, increasing the pressure pot by compressed air, to prevent damage to the packaging, which operating conditions are as follows: Since the compressed air is a poor conductor of heat, condition Steam itself has a certain pressure, therefore, when the temperature at the time of the sterilization process, not into the air, but only in the face of the sterilization temperature in heat, just open the compressed air into the pot, so the pot to increase from 0.15 to 0.2 Mpa. Until after sterilization, when the cooling cooling, stop the supply of air, the cooling water into the sprinkler pipe. Since the pot temperature drops, condensation of steam, leaving the pot to reduce the use of compressed air pressure force compensated. In the sterilization process, should pay attention to the original exhaust, thus discouraging the steam circulation. Also every 10 minutes each time bleed, promoting heat exchange. In short sterilization must meet the specified conditions, according to certain procedures, sterilization temperature level, the size of the sterilization pressure sterilization duration and method of operation of different products, such as sterilization process by making specific provisions. Temperature sterilization temperature sterilization pot prices need to ensure food safety and sanitation, available to consumers for immediate consumption, retorts price not only taste good, but also a balanced nutrition, we all like it. For we can be assured of food, not only has no side effects nutritional value is very high, do not regret the choice of food manufacturers! Foods, especially meat products are particularly vulnerable to broken, retorts price and the price is also expensive, and some really bad waste, such as meat products now sold out are usually high temperature retort sterilization after the sale, which the bacteria are have been killed. Retorts price, the price to eat a variety of high-temperature sterilization pot smoked tofu food supermarkets sell it are vacuum-packed, vacuum-packed tofu on the safety and health of it is certainly not a high-temperature sterilization equipment manufacturers in the production of tofu When, in addition to the smoke through the cooking process of drying colored. Retorts price, high-temperature sterilization pot prices like a kind of sausage ham |
Admin>>>
You are the 5410 visitor
Copyright © GuangDong ICP No. 10089450, Zhucheng and Machinery Co., Ltd. All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility
You are the 5410 visitor
Copyright © GuangDong ICP No. 10089450, Zhucheng and Machinery Co., Ltd. All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility

